SKODA FABIA III (NJ3)

1.6 (81 kW / 110 CV) 01/15 - 06/21

Save vehicle in the list

Brake discs

Diameter
256mm
Thickness
22mm
Height
37mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Minimum Brembo Xtra brake disc thickness: 19,8 mm
Min. thickness
19mm
Tightening torque
120Nm
Units per box
2
Front
axle
for PR number:1ZG
for PR number:1ZG
Where to Buy
Diameter
288mm
Thickness
25mm
Height
34mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Minimum Brembo Xtra brake disc thickness: 22,8 mm
Min. thickness
22mm
Tightening torque
120Nm
Units per box
2
Front
axle
for PR number:1ZC
for PR number:1ZC
Where to Buy
Diameter
230mm
Thickness
9mm
Height
40mm
Number of holes
5
Brake disc type
Solid
Centering
65mm
Minimum Brembo Xtra brake disc thickness: 7,5 mm
Min. thickness
7mm
Tightening torque
120Nm
Units per box
2
Rear
axle
for PR number:1KT
for PR number:1KT
Where to Buy

Brake pads

Width
131mm
Thickness
18mm
Height
52mm
Braking system
TRW
Wear indicator
Without
WVA number
25682, 25681
FMSI
D1776 9006
Accessories
With brake caliper bolts
With accessories
With anti-squeal shim
Front
axle
for PR number:1ZE
for PR number:1ZE
Where to Buy
Width
146mm
Thickness
20mm
Height
55mm
Braking system
Teves
Wear indicator
Without
WVA number
23130, 23131
FMSI
D768 7635, D768 7860
Accessories
With anti-squeal shim
With piston clip
With accessories
Front
axle
for PR number:1ZG
for PR number:1ZG
Where to Buy
Width
155 - 157 mm
Thickness
20mm
Height
66 - 71 mm
Braking system
Teves
Wear indicator
Electric
WVA number
23587, 23588, 23589
FMSI
D1107 8212, D1107 8760
Accessories
With anti-squeal shim
With piston clip
With accessories
Front
axle
for PR number:1ZC
for PR number:1ZC
Where to Buy
Width
87mm
Thickness
17mm
Height
53mm
Braking system
Lucas
Wear indicator
Without
WVA number
20961, 23554
FMSI
D1017 7920, D1023 7773, D1112 7773, D340 7335, D894 7773
Accessories
With anti-squeal shim
With brake caliper bolts
With accessories
Rear
axle
for PR number:1KK;1KT
for PR number:1KK;1KT
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
News Car support Bike support Bicycle support
App Brembo Parts Where to buy Distributors Brembo.com
Privacy Policy Cookie policy
Logo Google Play Logo App Store
© Brembo N. V. - P.IVA 00222620163 - Share capital 8.825.662,61 Euro Bergamo companies house - Credits
TecDoc logo The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
WeChat
Privacy Policy">