VW PHAETON (3D1, 3D2, 3D3, 3D4, 3D6, 3D7, 3D8, 3D9)

3.0 V6 TDI 4motion (171 kW / 233 CV) 06/07 - 11/08

Save vehicle in the list

Brake discs

Brembo
Diameter
360mm
Thickness
34mm
Height
59mm
Number of holes
5
Brake disc type
Ventilated
Centering
68mm
Min. thickness
31mm
Tightening torque
120Nm
Units per box
1
Front
axle
for PR number:1ZK;1ZL
for PR number:1ZK;1ZL
Where to Buy
Diameter
310mm
Thickness
22mm
Height
42mm
Number of holes
5
Brake disc type
Ventilated
Centering
68mm
Min. thickness
20mm
Tightening torque
120Nm
Units per box
2
Rear
axle
for PR number:1KP
for PR number:1KP
Where to Buy
Diameter
335mm
Thickness
22mm
Height
42mm
Number of holes
5
Brake disc type
Ventilated
Centering
68mm
Min. thickness
20mm
Units per box
2
Rear
axle
for PR number:1KY;2EA
for PR number:1KY;2EA
Where to Buy

Brake pads

Brembo
Width
193mm
Thickness
21mm
Height
73mm
Braking system
Teves
Wear indicator
Electric
WVA number
23896, 23897
FMSI
D1024 7928
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
for PR number:1ZK;1ZL
for PR number:1ZK;1ZL
Where to Buy
FMSI
D1018 7921
Braking system
Not for carbon-ceramic brake discs
Rear
axle
for PR number:1KD;1KP;1KY
for PR number:1KD;1KP;1KY
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
B-QUIET+

B-QUIET+

The all-in-one brake lubricant for professional installation.
Brembo B-Quiet+ is the new all-in-one lubricant developed to simplify brake pad installation and help ensure optimal braking system performance. Identified by the new code G 00 076, B-Quiet+ combines multiple functions in a single solution anti-noise action, lubricating function and EPDM compatibility.
Its synthetic, metal-free formulation makes it possible to use just one product for multiple applications, simplifying everyday workshop operations. B-Quiet+ also stands out for its new Brembo design, its larger 80 ml format, and packaging designed to combine a transport box with a countertop display. Compared with the single-function solutions commonly available on the market, B-Quiet+ brings practicality and versatility together in one product. A simpler solution for workshops, designed to meet the needs of modern braking systems.
More information
WeChat
Privacy Policy">