More resistance, less emissions
High corrosion resistance and respect for the environment.
The low environmental impact and the excellent resistance to corrosion allow the range of brake rotors with UV coating to establish a new benchmark for the protective treatment. Moreover, the exclusive metal finish offers an appealing aesthetic impact.
Advantages
Criticalities
Disadvantages
Standard painting | UV Coating | |
Resistance to corrosion | Standard painting
Medium
|
UV Coating
Medium
|
Medium | Standard painting
It can contain up to 15% of volatile organic compounds VOCs
|
UV Coating
Total abatement of volatile organic compounds VOCs
|
Health | Standard painting
It can contain toxins, such as methanol.
|
UV Coating
No health threatening components.
|
High resistance | Standard painting
Limited chemical resistance, for instance against wheel cleaners.
|
UV Coating
High resistance to chemical agents.
|
Energy consumption | Standard painting
4.67 kWh/rotors
|
UV Coating
0.08 kWh/rotors
|
All the pros of brake rotors with UV coating
Aspect
Metallic effect that gives the rotor a brilliant and clean appearance
Metallic effect that gives the rotor a brilliant and clean appearance
Wide range
More than 600 codes that cover the majority of the European car park.
More than 600 codes that cover the majority of the European car park.
Resistance to corrosion, moisture and temperature
Salt Spray Chamber test shows that UV brake rotors resistance to corrosion exceeds the standard of most of the car manufacturers.
Salt Spray Chamber test shows that UV brake rotors resistance to corrosion exceeds the standard of most of the car manufacturers.
Eco-friendly
Water based UV paint does not require any solvents. The ultraviolet (UV) coating process is extremely efficient from an energy point of view.
Water based UV paint does not require any solvents. The ultraviolet (UV) coating process is extremely efficient from an energy point of view.
Intelligent marking
The position of the marking on the hub allows the installer to immediately read the Minimum Thickness required for the replacement.
The position of the marking on the hub allows the installer to immediately read the Minimum Thickness required for the replacement.
Ready for use
Ready for use and easy to install
Ready for use and easy to install
Protective coating of the braking surface
The UV coating on the braking surface and on the outer diameter of the hub assures the complete protection of the brake rotors.
The UV coating on the braking surface and on the outer diameter of the hub assures the complete protection of the brake rotors.
Environment friendly
Brembo takes care of the environment and your health. By choosing the UV technology, instead of a standard one, Brembo saves up to 98% in terms of energy and CO2 emissions! The process has a significant impact on the environment: 100 brake rotors coated with UV technology, saves energy equal to: