RENAULT THALIA II (LU1/2_)

1.6 16V (77 Kw) 09/08

Discs

Diameter (mm)
Thickness (mm)
Technical specifications
Vehicle information
09.5802.24
Front axle
Diameter 259 mm
Thickness 20,6 mm
PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse.
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
259 mm
Overall height (A)
41 mm
Centring diameter (B)
61 mm
Number of holes (C)
4
Thickness (TH)
20,6 mm
Minimum thickness
17,7 mm
Tightening torque
105 Nm
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
09.5802.21
Front axle
Diameter 259 mm
Thickness 20,6 mm
PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
259 mm
Overall height (A)
41 mm
Centring diameter (B)
61 mm
Number of holes (C)
4
Thickness (TH)
20,6 mm
Minimum thickness
17,7 mm
Tightening torque
105 Nm
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
08.A141.17
Rear axle
Diameter 240 mm
Thickness 8 mm
Integrated bearing Brake discs with integrated wheel hub are used on the rear axle of specific car models.To simplify replacement, Brembo supplies a pre-assembled kit with the bearing previously fitted into the disc. Find out more
Vehicle information +ESP
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
240 mm
Overall height (A)
80,2 mm
Centring diameter (B)
25 mm
Number of holes (C)
4
Thickness (TH)
8 mm
Minimum thickness
7 mm
Vehicle information
+ESP
Tightening torque
110 Nm
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brembo Max

Diameter (mm)
Thickness (mm)
Technical specifications
Vehicle information
09.5802.76
Front axle
Diameter 259 mm
Thickness 20,6 mm
Brembo Max Grooved and painted, Brembo Max discs ensure excellent performance in all conditions, guaranteeing a prompt response especially in the first phase of braking. They optimise performances when driving and ensure constant renewal of the friction material. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
259 mm
Overall height (A)
41 mm
Centring diameter (B)
61 mm
Number of holes (C)
4
Thickness (TH)
20,6 mm
Minimum thickness
17,7 mm
Tightening torque
105 Nm
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brembo Xtra

Diameter (mm)
Thickness (mm)
Technical specifications
Vehicle information
09.5802.2X
Front axle
Diameter 259 mm
Thickness 20,6 mm
Brembo Xtra Brembo Xtra discs have holes on the braking surface that optimise performance in wet conditions, ensure constant renewal of the friction material and prompt braking in all conditions. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
259 mm
Overall height (A)
41 mm
Centring diameter (B)
61 mm
Number of holes (C)
4
Thickness (TH)
20,6 mm
Minimum thickness
18,4 mm
Tightening torque
105 Nm
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Pads

Wear indicator
Thickness (mm)
Braking system
Vehicle information
P 68 033
Front axle
Wear indicator Without
Thickness 17,3 mm
Braking system Lucas
Technical data
Technical drawing
Compatible vehicles
OE Part number
WVA
23973
Width
116,3 mm
Thickness
17,3 mm
Height
51,9 mm
Braking system
Lucas
Wear indicator
Without
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
P 68 024
Rear axle
Wear indicator Without
Thickness 16,2 mm
Braking system Lucas
Vehicle information +ESP
Technical data
Technical drawing
Compatible vehicles
OE Part number
WVA
20961, 23554
Width
87 mm
Thickness
16,2 mm
Height
53 mm
Braking system
Lucas
Wear indicator
Without
Vehicle information
+ESP
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Drums

Diameter (mm)
Width (mm)
Braking system
Vehicle information
14.7257.20
Rear axle
Diameter 203 mm
Width 50,5 mm
Braking system
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter (Diameter)
203 mm
Maximum diameter
204,45 mm
Width (A)
50,5 mm
Centring diameter (B)
52,3-51,9 mm
Overall height (C)
76 mm
Number of holes (D)
4
Drums
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brake shoes

Diameter (mm)
Width (mm)
Braking system
Vehicle information
S 61 520
Rear axle
Diameter 203,2 mm
Width 38 mm
FMSI
Technical data
Technical drawing
Compatible vehicles
OE Part number
Diameter
203,2 mm
Width
38 mm
Braking system
TRW-Lucas
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Remanufactured Calipers

Number of pistons
Piston diameter (mm)
Braking system
Vehicle information
F 68 035
Front axle
Number of pistons 1
Piston diameter 48 mm
Braking system GIRLING
Vehicle information 06/14; Symbol; Right; vented
Technical data
Technical drawing
Compatible vehicles
OE Part number
Piston diameter
48 mm
Number of pistons
1
Braking system
GIRLING
Position
Right
Vehicle information
06/14; Symbol; Right; vented
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
F 68 034
Front axle
Number of pistons 1
Piston diameter 48 mm
Braking system GIRLING
Vehicle information 06/14; Symbol; Left; vented
Technical data
Technical drawing
Compatible vehicles
OE Part number
Piston diameter
48 mm
Number of pistons
1
Braking system
GIRLING
Position
Left
Vehicle information
06/14; Symbol; Left; vented
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brake fluid

Exceeding the standards
Exceeding the standards
The Brembo Premium Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
Brembo Premium Brake Fluid
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
To request the Safety Data Sheet for Brembo brake fluid, write to us at academy@brembo.it

Brembo B-quiet

Maximum guarantee for your braking system
Maximum guarantee for your braking system
High load capacity and reliability over the long term for the new product from Brembo.
For the correct maintenance of your braking system, when changing the pads, always make sure that the braking components are well lubricated.Brembo B-Quiet is the brake lubricant to apply where the parts of the braking system move or slide or on the sliding surface of the calipers and pads, on the pins and on the bushings. In all these cases, Brembo B-Quiet lubricant effectively reduces braking system noise and guarantees protection of the components from corrosion.
To request the Brembo B-Quiet lubricant Safety Data Sheet, write to academy@brembo.it
The PR Numbers (Primary Equipment) classify some spare parts for VAG vehicles. They are listed on the vehicle data adhesive or in the service handbook The PR Numbers (Primary Equipment) classify some spare parts for VAG vehicles. They are listed on the vehicle data adhesive or in the service handbook