CITROËN XSARA Coupe (N0)

1.8 i (74 kW / 101 CV) 02/98 - 09/00

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
247mm
Thickness
20,4mm
Height
34mm
Number of holes
4
Brake disc type
Ventilated
Centering
66mm
Min. thickness
18,5mm
Tightening torque
90Nm
Units per box
2
Front
axle
Manufacturer Restriction:Eurorepar/Motaquip
Manufacturer Restriction:Eurorepar/Motaquip
Where to Buy
Diameter
247mm
Thickness
20,4mm
Height
34mm
Number of holes
4
Brake disc type
Ventilated
Centering
66mm
Min. thickness
18,5mm
Tightening torque
85Nm
Units per box
2
Front
axle
Manufacturer Restriction:ATE (Teves)
Manufacturer Restriction:ATE (Teves)
Where to Buy
Diameter
266mm
Thickness
20,5mm
Height
27mm
Number of holes
4
Brake disc type
Ventilated
Centering
66mm
Min. thickness
18,6mm
Tightening torque
90Nm
Units per box
2
Front
axle
Where to Buy
Diameter
247mm
Thickness
8mm
Height
25mm
Number of holes
4
Brake disc type
Solid
Centering
71mm
Min. thickness
6mm
Tightening torque
85Nm
Units per box
2
Rear
axle
Manufacturer Restriction:Bendix-Bosch
Manufacturer Restriction:Bendix-Bosch
Where to Buy

Brake pads

Width
137mm
Thickness
19mm
Height
52mm
Braking system
Bosch
Wear indicator
Without
WVA number
23954
FMSI
D1213 8333, D1213 8933, D1570 8779, D1943 8779, D1943 9263
Accessories
With anti-squeal shim
With brake caliper bolts
With accessories
Front
axle
Construction Year from:08/2000
Construction Year from:08/2000
Where to Buy
Width
140 - 141 mm
Thickness
17mm
Height
47mm
Braking system
Teves
Wear indicator
Without
WVA number
21827, 21430
FMSI
D1483 8681
Accessories
With piston clip
With accessories
With anti-squeal shim
Front
axle
Construction Year to:08/2000
Construction Year to:08/2000
Where to Buy
Width
105mm
Thickness
11mm
Height
55mm
Braking system
Bendix
Wear indicator
Prepared for wear indicator
WVA number
20974, 20973
FMSI
D1458 8658, D1482 8658
Accessories
With anti-squeal shim
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">