FORD MONDEO V Hatchback (CE)

2.0 TDCi (110 kW / 150 CV) 09/14 - 03/22

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
300mm
Thickness
28mm
Height
51mm
Number of holes
5
Brake disc type
Ventilated
Centering
64mm
Min. thickness
26,5mm
Units per box
1
Front
axle
Where to Buy
Diameter
302mm
Thickness
11mm
Height
51mm
Number of holes
5
Brake disc type
Solid
Centering
64mm
Min. thickness
9,5mm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
155 - 156 mm
Thickness
20mm
Height
67 - 72 mm
Braking system
Teves
Wear indicator
Without
WVA number
24124, 24123
FMSI
D1306 8421
Accessories
With anti-squeal shim
With piston clip
With accessories
Front
axle
Braking System:for vehicles without Performance brakes
Braking System:for vehicles without Performance brakes
Where to Buy
Width
155 - 156 mm
Thickness
20mm
Height
67 - 76 mm
Braking system
Teves
Wear indicator
Acoustic
WVA number
22270, 25592, 25593, 22269
FMSI
D1653 8882
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Country Specific Design:Europe
Country Specific Design:Europe
Where to Buy
Width
155mm
Thickness
19mm
Height
67 - 72 mm
Braking system
Teves
Wear indicator
Without
WVA number
24705, 25592, 25593
Accessories
With piston clip
With anti-squeal shim
With accessories
Directional
Yes
Front
axle
Vehicle Equipment Line/Trim Level:Motorcraft
Vehicle Equipment Line/Trim Level:Motorcraft
Where to Buy
Width
123mm
Thickness
16mm
Height
48 - 53 mm
Braking system
Teves
Wear indicator
Without
WVA number
22231, 22531
FMSI
D1665 8893, D1833 8893
Accessories
With anti-squeal shim
Rear
axle
Where to Buy
Width
123mm
Thickness
14mm
Height
48 - 53 mm
Braking system
ATE
Wear indicator
Acoustic
WVA number
22232, 22233, 22231
Accessories
With anti-squeal shim
Directional
Yes
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
News Car support Bike support Bicycle support
App Brembo Parts Where to buy Distributors Brembo.com
Privacy Policy Cookie policy
Logo Google Play Logo App Store
© Brembo N. V. - P.IVA 00222620163 - Share capital 8.825.662,61 Euro Bergamo companies house - Credits
TecDoc logo The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
WeChat
Privacy Policy">