MITSUBISHI LANCER VIII Sportback (CX_A)

2.0 Ralliart 4WD (CX4A) (177 kW / 241 CV) 10/08

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
294mm
Thickness
24mm
Height
46mm
Number of holes
5
Brake disc type
Ventilated
Centering
69mm
Minimum Brembo Xtra brake disc thickness: 22,6 mm
Min. thickness
22,4mm
Tightening torque
100Nm
Units per box
2
Front
axle
Where to Buy
Diameter
302mm
Thickness
10mm
Height
59mm
Number of holes
5
Brake disc type
Solid
Centering
80mm
Min. thickness
8,4mm
Tightening torque
100Nm
Units per box
2
Rear
axle
Where to Buy

Brake pads

Width
150mm
Thickness
16mm
Height
59mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21363, 21768, 21769
FMSI
D530 7412, D723 7412
Accessories
With anti-squeal shim
Front
axle
Where to Buy
Width
91 - 111 mm
Thickness
16mm
Height
45mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
23582, 23583
FMSI
D1343 7743, D868 7743
Accessories
With accessories
With anti-squeal shim
With piston clip
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Akebono
Type
Assembly kit
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">