MITSUBISHI OUTLANDER I (CU_W)

2.0 (CU2W) (100 kW / 136 CV) 05/03 - 10/06

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
294mm
Thickness
24mm
Height
46mm
Number of holes
5
Brake disc type
Ventilated
Centering
69mm
Minimum Brembo Xtra brake disc thickness: 22,6 mm
Min. thickness
22,4mm
Tightening torque
100Nm
Units per box
2
Front
axle
Where to Buy
Diameter
262mm
Thickness
9,5mm
Height
60mm
Number of holes
5
Brake disc type
Solid
Centering
90mm
Min. thickness
8,4mm
Tightening torque
100Nm
Units per box
2
Rear
axle
Where to Buy

Brake pads

Width
145mm
Thickness
16mm
Height
55mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
23584
FMSI
D866 7741
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Construction Year to:12/2004
Construction Year to:12/2004
Where to Buy
Width
145mm
Thickness
16mm
Height
55mm
Braking system
Akebono
Wear indicator
Without
FMSI
D866 8338
Accessories
With anti-squeal shim
Front
axle
Construction Year to:12/2004
Construction Year to:12/2004
Where to Buy
Width
150mm
Thickness
16mm
Height
59mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21363, 21768, 21769
FMSI
D530 7412, D723 7412
Accessories
With anti-squeal shim
Front
axle
Where to Buy
Width
150mm
Thickness
16mm
Height
59mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21370
FMSI
D530 7412, D723 7412A
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Where to Buy
Width
85 - 106 mm
Thickness
15mm
Height
35 - 40 mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
24014, 24015
FMSI
D1037 7940
Accessories
With accessories
With anti-squeal shim
With piston clip
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Akebono
Type
Assembly kit
Front
axle
Where to Buy

UPGRADE brake pads

Width
145mm
Thickness
16mm
Wear indicator
Acoustic
WVA number
23584
Front
axle
Construction Year to:12/2004
Construction Year to:12/2004
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">