TOYOTA HILUX VII Pickup (_N1_, _N2_, _N3_)

2.5 D 4WD (KUN25) (75 kW / 102 CV) 03/05 - 05/15

This application is not available for your country. Contact us for more information

Brake discs

Diameter
297mm
Thickness
25mm
Height
67mm
Number of holes
6
Brake disc type
Ventilated
Centering
108mm
Minimum Brembo Xtra brake disc thickness: 23,5 mm
Min. thickness
23mm
Tightening torque
112Nm
Units per box
2
Front
axle
Diameter
319mm
Thickness
28mm
Height
67mm
Number of holes
6
Brake disc type
Ventilated
Centering
108mm
Min. thickness
26mm
Units per box
1
Front
axle
Braking/Driving Dynamics:for vehicles with ESP
Braking/Driving Dynamics:for vehicles with ESP

UPGRADE brake discs

Diameter
297mm
Thickness
25mm
Height
67mm
Number of holes
6
Brake disc type
Solid
Centering
108mm
Min. thickness
23mm
Tightening torque
112Nm
Units per box
1
Front
axle

Brake pads

Width
119mm
Thickness
15mm
Height
68mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21680, 21679
FMSI
D799 7671
Accessories
With anti-squeal shim
Front
axle
Construction Year to:09/2008
Construction Year to:09/2008
Width
119mm
Thickness
18mm
Height
68mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21680, 21679
FMSI
D799 7671
Accessories
With anti-squeal shim
Front
axle
Wheelbase:not for extended wheelbase
Wheelbase:not for extended wheelbase
Width
119mm
Thickness
17mm
Height
68mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21680, 21679
FMSI
D799 7671
Accessories
With anti-squeal shim
Front
axle
Construction Year from:01/2007; Wheelbase:not for extended wheelbase
Construction Year from:01/2007; Wheelbase:not for extended wheelbase
Width
140mm
Thickness
16mm
Height
55mm
Braking system
Advics
Wear indicator
Without
WVA number
25246
FMSI
D1523 8731
Accessories
With anti-squeal shim
Front
axle
Construction Year from:08/2008
Construction Year from:08/2008

Drums

Diameter
295,1mm
Width
67mm
Height
76,6mm
Number of holes
6
Centering
108mm
Max diameter
297mm
Rear
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">