Upgrade Line
Cool looks and
day-to-day driving pleasure
The brake calipers in the UPGRADE range are designed to dominate the track, offering absolute control even under the most extreme speed and temperature conditions. Made with high-performance, precision-machined materials, they ensure prompt response and superior braking power, lap after lap. Their compact and lightweight design helps reduce the unsprung weight, significantly improving vehicle dynamics. Stability, endurance and consistency: every detail is designed for motorbike enthusiasts seeking uncompromising performance.
GP4 MOTO GP
The GP4-MotoGP brake caliper, born from the track for the road, is perfectly suited to the needs of today's motorbikes and the most demanding track enthusiasts. Just like the Brembo calipers used by professional riders in MotoGPTM and SBKTM, this new monoblock caliper is carved from an aluminium billet, ribbed, with nickel-plating treatment and a new design. The GP4-MotoGPTM caliper is derived from the technology developed in MotoGPTM and exploits the diagonal sliding of the pads to boost braking torque with the same amount of force applied to the lever for unprecedented performance. Particular attention was paid to the introduction of ventilation ribs on the outer shell and new racing pistons, both of which improve heat exchange in the braking system and contribute to cooling. No less important is the eye-catching design of the most recent Brembo GP4-MotoGPTM caliper, further enhanced by a nickel surface finish that gives the caliper a brighter, smoother appearance.
GP4 Brake Calipers - Front Application
GP4-MS
Like the Brembo calipers used in MotoGP, the design of the GP4-MS focused on topological optimisation. It is carved from a single block of aluminium monoblock for better resistance to high temperatures and superior performance compared to cast components. The GP4-MS also shares a nickel surface finish with racing calipers, but uses a double gasket (one inside the piston and a second as a dust boot). This dispenses with the obligation to undergo periodic overhauls that are characteristic of track calipers.
GP4-RS
For a significant standard system upgrade, there is the GP4-RS. This too is a monoblock, produced through a highly complex casting technique and with pistons surrounded by cooling fins. For the rear wheel, we recommend the GP2-CR and GP2-SS, both two-piece billet and equipped with two 34 mm pistons, offering a good combination of lightness and rigidity.
GP4-RX
The body of this caliper is carved entirely from a billet and consists of two mechanically connected pieces. Particular care was devoted to achieving high braking power and rigidity using innovative design solutions. The hydraulic system was the object of expert fine-tuning. The use of a single diameter for the pistons promotes a further increase in braking power and modulability.
GP4-RB
The iconic carved from a billet in two pieces is now also available with an anodised black finish, which enhances the technical features and appearance of the motorbike.
GP2 Brake Calipers - Rear Wheel Application
GP2-SS
Caliper carved from a billet in two pieces. This machining process guarantees maximum rigidity and low weight for excellent performance..
GP2-CR
This caliper carved from a billet in two pieces is the ideal choice for everyone who wants to upgrade their Café Racer motorbikes with an exclusive product. The eye-catching black finish forms a striking pair in perfect harmony with the front calipers.
Axial Brake Caliper
P4.30-34
The most popular brake caliper for soft customisation is available in two colours: gold - black. It is completed by the Brembo logo engraved in bas-relief and hand-painted.
Family 484
P.484 Cafè Racer
The Brembo "484" caliper was created to confer a marked Café Racer connotation the motorbike.
This caliper is carved entirely from a billet, starting from a solid block of aluminium machined using state-of-the-art CAM technology.
The caliper is finished with a hard anthracite black oxidation treatment with the characteristic red Brembo logo boldly standing out.
484 Logopuro
These calipers are made of aluminium and manufactured on high-precision CNC machines. They are carved entirely from a billet and the body is completed with an anthracite black anodised finish. The look is completed by the embossed Brembo logo: polished aluminium for the 484 LOGOPURO version or black anodised for the 484 LOGONERO version.
