AUDI A7 Sportback (4GA, 4GF)

S7 quattro (309 Kw) 02/12 - 03/15

Discs

Diameter (mm)
Thickness (mm)
Technical specifications
Vehicle information
09.B972.11
Front axle
Diameter 320 mm
Thickness 30 mm
High Carbon disc (HC) Thanks to the high percentage of carbon in the chemical composition of the cast iron, the HC disc provides greater damping coefficient, able to reduce vibration and noise while driving. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1LA
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Diameter (Diameter)
320 mm
Overall height (A)
52,1 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
30 mm
Minimum thickness
28 mm
Vehicle information
PR:1LA
Unit per box
1
EANCode
8020584218365
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
09.B970.11
Front axle
Diameter 345 mm
Thickness 30 mm
High Carbon disc (HC) Thanks to the high percentage of carbon in the chemical composition of the cast iron, the HC disc provides greater damping coefficient, able to reduce vibration and noise while driving. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1LJ; PR:1LP
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Diameter (Diameter)
345 mm
Overall height (A)
52,1 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
30 mm
Minimum thickness
28 mm
Vehicle information
PR:1LJ; PR:1LP
Unit per box
1
EANCode
8020584218389
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
09.B971.11
Front axle
Diameter 356 mm
Thickness 34 mm
PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1LF; PR:1LL; PR:1ZK
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Diameter (Diameter)
356 mm
Overall height (A)
52,1 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
34 mm
Minimum thickness
31,5 mm
Vehicle information
PR:1LF; PR:1LL; PR:1ZK
Unit per box
1
EANCode
8020584218372
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
08.A759.10
Rear axle
Diameter 300 mm
Thickness 12 mm
Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse.
Vehicle information PR:1KW
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Diameter (Diameter)
300 mm
Overall height (A)
36,2 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
12 mm
Minimum thickness
10 mm
Vehicle information
PR:1KW
Tightening torque
120 Nm
Unit per box
2
EANCode
8020584023570
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
08.A759.11
Rear axle
Diameter 300 mm
Thickness 12 mm
Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1KW
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Diameter (Diameter)
300 mm
Overall height (A)
36,2 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
12 mm
Minimum thickness
10 mm
Vehicle information
PR:1KW
Tightening torque
120 Nm
Unit per box
2
EANCode
8020584023600
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
09.B969.11
Rear axle
Diameter 330 mm
Thickness 22 mm
High Carbon disc (HC) Thanks to the high percentage of carbon in the chemical composition of the cast iron, the HC disc provides greater damping coefficient, able to reduce vibration and noise while driving. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:2EA; PR:2EJ
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Diameter (Diameter)
330 mm
Overall height (A)
36,1 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
22 mm
Minimum thickness
20 mm
Vehicle information
PR:2EA; PR:2EJ
Unit per box
2
EANCode
8020584218396
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
09.C170.11
Rear axle
Diameter 356 mm
Thickness 22 mm
High Carbon disc (HC) Thanks to the high percentage of carbon in the chemical composition of the cast iron, the HC disc provides greater damping coefficient, able to reduce vibration and noise while driving. Find out more PVT vented disc The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1KY
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Diameter (Diameter)
356 mm
Overall height (A)
36,1 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
22 mm
Minimum thickness
20 mm
Vehicle information
PR:1KY
Unit per box
2
EANCode
8020584225530
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brembo Xtra

Diameter (mm)
Thickness (mm)
Technical specifications
Vehicle information
08.A759.1X
Rear axle
Diameter 300 mm
Thickness 12 mm
Brembo Xtra Brembo Xtra discs have holes on the braking surface that optimise performance in wet conditions, ensure constant renewal of the friction material and prompt braking in all conditions. Find out more Disc with fixing screw By supplying the fixing screw in the disc box, Brembo provides extra help to the mechanic if the original screw is rusty or worn to such an extent as to prevent or make it difficult to reuse. UV Disc The UV coating process provides a superior corrosion resistance and full disc protection. Find out more
Vehicle information PR:1KW
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Diameter (Diameter)
300 mm
Overall height (A)
36,2 mm
Centring diameter (B)
68 mm
Number of holes (C)
5
Thickness (TH)
12 mm
Minimum thickness
10,5 mm
Vehicle information
PR:1KW
Tightening torque
120 Nm
Unit per box
2
EANCode
8020584215326
Discs
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Pads

Wear indicator
Thickness (mm)
Braking system
Vehicle information
P 85 136
Front axle
Wear indicator Prepared
Thickness 17 mm
Braking system Brembo
Vehicle information PR:1LU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
WVA
24847
Width
188 mm
Thickness
17 mm
Height
101 mm
Braking system
Brembo
Features
With counterweights
Wear indicator
Prepared
EANCode
8020584112168
Vehicle information
PR:1LU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
P 85 150
Rear axle
Wear indicator Electric
Thickness 17,5 mm
Braking system Lucas
Vehicle information PR:2EA
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
WVA
24606, 25214
Width
116,6 mm
Thickness
17,5 mm
Height
58,5 - 59,5 mm
Braking system
Lucas
Features
With accessories
With brake caliper screws
Wear indicator
Electric
EANCode
8020584084045
Vehicle information
PR:2EA
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
P 85 119
Rear axle
Wear indicator Electric
Thickness 17,5 mm
Braking system Lucas
Vehicle information PR:2EE
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
WVA
24606, 25214
Width
116,6 mm
Thickness
17,5 mm
Height
59 - 60 mm
Braking system
Lucas
Features
With accessories
With brake caliper screws
Wear indicator
Electric
EANCode
8020584103920
Vehicle information
PR:2EE
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Pad acc.

Type
Length (mm)
Braking system
Vehicle information
A 00 466
Front axle
Type WI - Wear Indicator WI Wear Indicator
Length 264 mm
Braking system
Vehicle information PR:1LU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Type
Wear Indicator
Length
264 mm
EANCode
8020584108727
Vehicle information
PR:1LU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Remanufactured Calipers

Number of pistons
Piston diameter (mm)
Braking system
Vehicle information
F 85 304 No longer available
Front axle
Number of pistons 6
Piston diameter 32 - 34 - 38 mm mm
Braking system BREMBO
Vehicle information 03/15; Left; PR:1LU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Piston diameter
32 - 34 - 38 mm mm
Number of pistons
6
Braking system
BREMBO
Position
Left
EANCode
8020584534298
Vehicle information
03/15; Left; PR:1LU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
F 85 305 No longer available
Front axle
Number of pistons 6
Piston diameter 32 - 34 - 38 mm mm
Braking system BREMBO
Vehicle information 03/15; Right; PR:1LU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front
Piston diameter
32 - 34 - 38 mm mm
Number of pistons
6
Braking system
BREMBO
Position
Right
EANCode
8020584534304
Vehicle information
03/15; Right; PR:1LU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
F 85 314
Rear axle
Number of pistons 1
Piston diameter 43 mm
Braking system TRW
Vehicle information 03/15; Left; PR:1KU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Piston diameter
43 mm
Number of pistons
1
Braking system
TRW
Position
Left
EANCode
8020584534397
Vehicle information
03/15; Left; PR:1KU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
F 85 315
Rear axle
Number of pistons 1
Piston diameter 43 mm
Braking system TRW
Vehicle information 03/15; Right; PR:1KU
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Rear
Piston diameter
43 mm
Number of pistons
1
Braking system
TRW
Position
Right
EANCode
8020584534403
Vehicle information
03/15; Right; PR:1KU
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brake hoses

Width (mm)
Thread 1
Thread 2
Vehicle information
T 85 154
Front axle
Length 470 mm
Thread 1 F10X1
Thread 2 M10X1
Vehicle information Left; Right; PR:1KW/1KY/2EA
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front, Rear
Length
470 mm
Thread 1
F10X1
Thread 2
M10X1
Vehicle information
Left; Right; PR:1KW/1KY/2EA
EANCode
8432509656624
Fitting
Left/right
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available
T 85 154
Rear axle
Length 470 mm
Thread 1 F10X1
Thread 2 M10X1
Vehicle information Left; Right; PR:1KW/1KY/2EA
Technical data
Technical drawing
Compatible vehicles
OE Part number
Axle
Front, Rear
Length
470 mm
Thread 1
F10X1
Thread 2
M10X1
Vehicle information
Left; Right; PR:1KW/1KY/2EA
EANCode
8432509656624
Fitting
Left/right
Loader
The technical drawing is not available yet
Loader
Model Type Kw Year
Model Type Kw Year
No compatible vehicles found
Loader
Compatible OE codes
No OE codes available

Brake fluid

Exceeding the standards
Exceeding the standards
The Brembo Premium Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
Brembo Premium Brake Fluid
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
To request the Safety Data Sheet for Brembo brake fluid, write to us at information request

Brembo B-quiet

Maximum guarantee for your braking system
Maximum guarantee for your braking system
High load capacity and reliability over the long term for the new product from Brembo.
For the correct maintenance of your braking system, when changing the pads, always make sure that the braking components are well lubricated.Brembo B-Quiet is the brake lubricant to apply at the contact points between the caliper and the pad, Brembo B-Quiet lubricant effectively reduces braking system noise and guarantees protection of the components from corrosion.
To request the Brembo B-Quiet lubricant Safety Data Sheet, write to information request
The PR Numbers (Primary Equipment) classify some spare parts for VAG vehicles. They are listed on the vehicle data adhesive or in the service handbook The PR Numbers (Primary Equipment) classify some spare parts for VAG vehicles. They are listed on the vehicle data adhesive or in the service handbook