CITROËN ZX (N2)

2.0 i 16V (110 kW / 150 CV) 06/94 - 06/97

Save vehicle in the list

Brake discs

Diameter
266mm
Thickness
20,5mm
Height
27mm
Number of holes
4
Brake disc type
Ventilated
Centering
66mm
Minimum Brembo Xtra brake disc thickness: 19,1 mm
Min. thickness
18,6mm
Tightening torque
90Nm
Units per box
2
Front
axle
Where to Buy
Diameter
247mm
Thickness
8mm
Height
25mm
Number of holes
4
Brake disc type
Solid
Centering
71mm
Minimum Brembo Xtra brake disc thickness: 6,5 mm
Min. thickness
6mm
Tightening torque
85Nm
Units per box
2
Rear
axle
Manufacturer Restriction:Bendix-Bosch
Manufacturer Restriction:Bendix-Bosch
Where to Buy

Brake pads

Width
95mm
Thickness
19mm
Height
49mm
Braking system
Lucas
Wear indicator
Electric
WVA number
23169, 23170
FMSI
D706 7580
Accessories
With accessories
With anti-squeal shim
With brake caliper bolts
Front
axle
Where to Buy
Width
105mm
Thickness
11mm
Height
55mm
Braking system
Bendix
Wear indicator
Prepared for wear indicator
WVA number
20973, 20974
FMSI
D1458 8658, D1482 8658
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Bendix
Type
Assembly kit
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
54mm
Number of pistons
1
Braking system
GIRLING
Position
Left
Front
axle
Where to Buy
Diameter
54mm
Number of pistons
1
Braking system
GIRLING
Position
Right
Front
axle
Where to Buy
Diameter
32mm
Number of pistons
1
Braking system
BENDIX
Position
Left
Rear
axle
Where to Buy
Diameter
32mm
Number of pistons
1
Braking system
BENDIX
Position
Right
Rear
axle
Where to Buy

Clutch master cylinders

Diameter
23,81mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy
Diameter
23,81mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy

Brake hoses

Length
185mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
External
Left
Right
Rear
axle
Where to Buy
Length
222mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Where to Buy
Length
268mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Right
Rear right
axle
Where to Buy
Length
470mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">