FIAT TIPO (160_)

1.6 (56 kW / 76 CV) 03/93 - 10/95

Save vehicle in the list

Brake discs

Diameter
257mm
Thickness
12mm
Height
41mm
Number of holes
4
Brake disc type
Solid
Centering
59mm
Min. thickness
10,2mm
Tightening torque
98Nm
Units per box
2
Front
axle
Transmission Type:Automatic Transmission; Braking/Driving Dynamics:for...
Transmission Type:Automatic Transmission; Braking/Driving Dynamics:for vehicles with ABS
Where to Buy
Diameter
240mm
Thickness
11mm
Height
40mm
Number of holes
4
Brake disc type
Solid
Centering
59mm
Minimum Brembo Xtra brake disc thickness: 9,5 mm
Min. thickness
9,2mm
Tightening torque
98Nm
Units per box
2
Front
axle
Transmission Type:Manual Transmission; Braking/Driving Dynamics:for...
Transmission Type:Manual Transmission; Braking/Driving Dynamics:for vehicles without ABS; Braking/Driving Dynamics:for vehicles with ABS
Where to Buy

Drums

Diameter
180mm
Width
38,7mm
Height
54mm
Number of holes
4
Centering
59mm
Max diameter
181,3mm
Rear
axle
Where to Buy

Shoe kit

Diameter
180mm
Width
32mm
Master cylinder diameter
22mm
Type of assembly
Pre-assembled
Braking system
Bendix
Brake proportioning valve
Absent
Rear
axle
Transmission Type:Manual Transmission; Braking/Driving Dynamics:for...
Transmission Type:Manual Transmission; Braking/Driving Dynamics:for vehicles without ABS
Where to Buy

Clutch master cylinders

Diameter
22,2mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy
Diameter
22,2mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
22mm
Threading
10 x 1
Braking system
Bendix
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1
Braking system
Bendix
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1
Braking system
APL
Material
Cast Iron
Rear
axle
Where to Buy

Brake master cylinders

Diameter
19,05mm
Threading
12 x 1
Braking system
BOSCH
Material
Cast Iron
Front
axle
Where to Buy

Clutch cylinders

Diameter
25,4mm
Threading
12 x 1
Braking system
Bendix/Bosch
Material
Cast Iron
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
WeChat
Privacy Policy">