LDV CONVOY Van

2.5 DI (56 kW / 76 CV) 10/98 - 04/09

Save vehicle in the list

Brake discs

Diameter
276mm
Thickness
14,3mm
Height
53mm
Number of holes
5
Brake disc type
Solid
Centering
83mm
Min. thickness
12,8mm
Tightening torque
100Nm
Units per box
2
Front
axle
Where to Buy

Brake pads

Width
105mm
Thickness
18mm
Height
75mm
Braking system
Lockheed
Wear indicator
Without
WVA number
20359
FMSI
D519 7400
Accessories
With accessories
With anti-squeal shim
Front
axle
Cylinder Piston Diameter [mm]:41
Cylinder Piston Diameter [mm]:41
Where to Buy
Width
127mm
Thickness
18mm
Height
71mm
Braking system
Lockheed
Wear indicator
Without
WVA number
20904
FMSI
D61 796
Accessories
With anti-squeal shim
Front
axle
Cylinder Piston Diameter [mm]:46
Cylinder Piston Diameter [mm]:46
Where to Buy

Shoes

Diameter
229mm
Width
45mm
Braking system
AP Lockheed
Rear
axle
Where to Buy
Diameter
254mm
Width
70mm
Braking system
AP Lockheed
Accessories
With accessories
Rear
axle
Where to Buy
Diameter
254mm
Width
70mm
Braking system
AP Lockheed
Rear
axle
Where to Buy
Diameter
254mm
Width
70mm
Braking system
AP Lockheed
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
46mm
Number of pistons
4
Braking system
AP LOCKHEED
Position
Left
Front
axle
Construction Year to:02/2002; Vehicle type:with two inlets
Construction Year to:02/2002; Vehicle type:with two inlets
Where to Buy
Diameter
46mm
Number of pistons
4
Braking system
AP LOCKHEED
Position
Right
Front
axle
Construction Year to:02/2002; Vehicle type:with two inlets
Construction Year to:02/2002; Vehicle type:with two inlets
Where to Buy

Clutch master cylinders

Diameter
23,81mm
Threading
3/8 24 UNF (1),10 x 1 (3)
Braking system
APL
Material
Cast Iron
Front
axle
Where to Buy
Diameter
22,22mm
Threading
10 x 1 (3),3/8 24 UNF (1)
Braking system
APL
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
17,46mm
Threading
10 x 1
Braking system
APL
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
15,87mm
Threading
10 x 1
Braking system
APL
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
25,4mm
Threading
10 x 1,25
Braking system
SIRMAC
Material
Cast Iron
Rear
axle
Where to Buy

Brake hoses

Length
394mm
Threading 1
M10X1
Threading 2
M10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">