MERCEDES-BENZ C-CLASS (W202)

C 43 AMG (202.033) (225 kW / 306 CV) 08/97 - 05/00

Save vehicle in the list

Brake discs

Diameter
300mm
Thickness
22mm
Height
56mm
Number of holes
5
Brake disc type
Ventilated
Centering
67mm
Min. thickness
19,4mm
Tightening torque
110Nm
Units per box
2
Rear
axle
Where to Buy

Brake pads

Width
195mm
Thickness
21mm
Height
74mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
21484, 21485
FMSI
D1115 7561, D682 7561
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Where to Buy
Width
62mm
Thickness
16mm
Height
70mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
21305
FMSI
D577 7457, D603 7484, D603 7526
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

Brake pad accessories

Length
90mm
Type
Wear indicator
Front
axle
Where to Buy
Length
90mm
Type
Wear indicator
Rear
axle
Where to Buy

UPGRADE GT kit

Diameter
332mm
Thickness
32mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Front
axle
Where to Buy
Diameter
355mm
Thickness
32mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Front
axle
Where to Buy
Diameter
355mm
Thickness
32mm
Caliper pistons
6
Disc type
2 pieces
Caliper type
Monoblock
Front
axle
Where to Buy
Diameter
328mm
Thickness
28mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Rear
axle
Where to Buy

Shoes

Diameter
164mm
Width
20mm
Braking system
TRW
Type
Parking brake
Accessories
With accessories
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
42mm
Number of pistons
2
Braking system
ATE
Position
Left
Rear
axle
Where to Buy
Diameter
42mm
Number of pistons
2
Braking system
ATE
Position
Right
Rear
axle
Where to Buy

Clutch master cylinders

Threading
12 x 1 (2)
Braking system
TRW
Material
Aluminium
Front
axle
Where to Buy
Threading
12 x 1 (2)
Braking system
TRW
Material
Aluminium
Front
axle
Where to Buy

Brake hoses

Length
313mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Left
Right
Rear
axle
Where to Buy
Length
415mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Length
505mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">