MITSUBISHI COLT IV (CA_A)

1.8 GTi 16V (CA5A) (103 kW / 140 CV) 04/92 - 04/96

Save vehicle in the list

Brake discs

Diameter
256mm
Thickness
24mm
Height
45mm
Number of holes
4
Brake disc type
Ventilated
Centering
64mm
Min. thickness
22,4mm
Tightening torque
108Nm
Units per box
2
Front
axle
Where to Buy
Diameter
260mm
Thickness
10mm
Height
41mm
Number of holes
4
Brake disc type
Solid
Centering
64mm
Min. thickness
8,4mm
Units per box
2
Rear
axle
Where to Buy

Brake pads

Width
128mm
Thickness
16mm
Height
52mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21647, 21648, 21649
FMSI
D484 7365
Accessories
With anti-squeal shim
Front
axle
Where to Buy
Width
99mm
Thickness
15mm
Height
38mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21872, 21873, 21874
FMSI
D596 7474
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Akebono
Type
Assembly kit
Front
axle
Where to Buy

Remanufactured calipers

Diameter
54mm
Number of pistons
1
Braking system
AKEBONO
Position
Left
Front
axle
Construction Year to:08/1995
Construction Year to:08/1995
Where to Buy
Diameter
54mm
Number of pistons
1
Braking system
AKEBONO
Position
Right
Front
axle
Construction Year to:08/1995
Construction Year to:08/1995
Where to Buy
Diameter
30mm
Number of pistons
1
Braking system
AKEBONO
Position
Left
Rear
axle
Construction Year to:08/1995
Construction Year to:08/1995
Where to Buy
Diameter
30mm
Number of pistons
1
Braking system
AKEBONO
Position
Right
Rear
axle
Construction Year to:08/1995
Construction Year to:08/1995
Where to Buy

Brake wheel cylinders

Diameter
17,46mm
Threading
10 x 1
Material
Cast Iron
Rear
axle
Where to Buy

Brake hoses

Length
230mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Where to Buy
Length
270mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Where to Buy
Length
430mm
Threading 1
10
Threading 2
F10X1
Assembly position
Left
Right
Front
axle
Where to Buy

Clutch cylinders

Diameter
20,64mm
Threading
10 x 1
Material
Cast Iron
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">