MITSUBISHI PAJERO I (L04_G, L14_G)

3.0 V6 (L141G, L146G) (104 kW / 141 CV) 11/88 - 11/90

Brake discs

Diameter
277mm
Thickness
22mm
Height
45mm
Number of holes
6
Brake disc type
Ventilated
Centering
87mm
Min. thickness
20,4mm
Tightening torque
100Nm
Units per box
2
Front
axle

Brake pads

Width
128mm
Thickness
17mm
Height
57mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21374, 21373, 21375
FMSI
D349 7241
Accessories
With anti-squeal shim
Front
axle
Width
108mm
Thickness
13mm
Height
41mm
Braking system
Akebono
Wear indicator
Without
WVA number
20066
Accessories
With anti-squeal shim
Rear
axle
Vehicle type:L146; Construction Year from:03/1989
Vehicle type:L146; Construction Year from:03/1989

Drums

Diameter
254mm
Width
62mm
Height
83mm
Number of holes
6
Centering
93,5mm
Max diameter
256mm
Rear
axle

Shoes

Diameter
254mm
Width
52mm
Braking system
Akebono
Rear
axle

Shoe kit

Diameter
254mm
Width
51mm
Master cylinder diameter
22mm
Type of assembly
Not pre-assembled
Braking system
Akebono
Brake proportioning valve
Absent
Rear
axle
Construction Year from:01/1990
Construction Year from:01/1990

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
AKEBONO
Position
Left
Front
axle
Construction Year from:06/1989
Construction Year from:06/1989
Diameter
57mm
Number of pistons
1
Braking system
AKEBONO
Position
Right
Front
axle
Construction Year from:06/1989
Construction Year from:06/1989

Clutch master cylinders

Diameter
23,81mm
Threading
10 x 1 (2)
Braking system
NABCO
Material
Aluminium
Front
axle

Brake wheel cylinders

Diameter
22,2mm
Threading
10 x 1
Material
Cast Iron
Assembly position
Right
Rear right
axle
Diameter
22,2mm
Threading
10 x 1
Material
Cast Iron
Assembly position
Left
Rear left
axle

Brake hoses

Length
365mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Length
270mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Centre
Rear
axle
Length
210mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
External
Left
Right
Front
axle
Length
190mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Internal
Left
Right
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">