NISSAN 200SX (S13)

1.8 (99 kW / 135 CV) 09/88 - 03/94

Save vehicle in the list

Brake discs

Diameter
257mm
Thickness
22mm
Height
49mm
Number of holes
4
Brake disc type
Ventilated
Centering
68mm
Min. thickness
20mm
Units per box
2
Front
axle
Construction Year to:09/1991
Construction Year to:09/1991
Where to Buy
Diameter
280mm
Thickness
22mm
Height
49mm
Number of holes
4
Brake disc type
Ventilated
Centering
68mm
Min. thickness
20mm
Tightening torque
108Nm
Units per box
2
Front
axle
Construction Year from:10/1991
Construction Year from:10/1991
Where to Buy

Brake pads

Width
137mm
Thickness
17mm
Height
54 - 55 mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21526, 21527, 21528
FMSI
D449 7329, D462 7342, D462 8314, D485 7342
Accessories
With anti-squeal shim
Front
axle
Construction Year to:09/1991
Construction Year to:09/1991
Where to Buy
Width
137mm
Thickness
17mm
Height
53mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21561, 21562, 21633
FMSI
D526 7407, D653 7318, D653 7407, D815 7605, D815 7783
Accessories
With anti-squeal shim
Front
axle
Construction Year from:10/1991
Construction Year from:10/1991
Where to Buy
Width
99mm
Thickness
16mm
Height
35mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
21341, 21342, 21343
FMSI
D479 7360
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
NISSAN
Position
Left
Front
axle
Construction Year to:09/1991
Construction Year to:09/1991
Where to Buy
Diameter
57mm
Number of pistons
1
Braking system
NISSAN
Position
Right
Front
axle
Construction Year to:09/1991
Construction Year to:09/1991
Where to Buy
Diameter
35mm
Number of pistons
1
Braking system
AKEBONO
Position
Left
Rear
axle
Where to Buy
Diameter
35mm
Number of pistons
1
Braking system
AKEBONO
Position
Right
Rear
axle
Where to Buy

Clutch cylinders

Diameter
19,05mm
Threading
10 x 1
Braking system
NABCO
Material
Cast Iron
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">