OPEL AGILA (B) (H08)

1.2 (F68) (69 kW / 94 CV) 04/10 - 10/14

Brake discs

Diameter
252mm
Thickness
20mm
Height
40mm
Number of holes
4
Brake disc type
Ventilated
Centering
60mm
Min. thickness
18mm
Tightening torque
85Nm
Units per box
2
Front
axle

Brake pads

Width
116mm
Thickness
17mm
Height
53mm
Braking system
Lucas
Wear indicator
Acoustic
WVA number
24403, 23973
FMSI
D1491 8691
Accessories
With anti-squeal shim
With accessories
With brake caliper bolts
Front
axle

Shoes

Diameter
200mm
Width
32mm
Braking system
Bosch
Parking brake lever
With handbrake lever
Rear
axle

Shoe kit

Diameter
200mm
Width
32mm
Master cylinder diameter
19mm
Type of assembly
Not pre-assembled
Braking system
Bosch
Brake proportioning valve
Absent
Rear
axle
Diameter
200mm
Width
32mm
Master cylinder diameter
19mm
Type of assembly
Pre-assembled
Braking system
Bosch
Brake proportioning valve
Absent
Rear
axle

Remanufactured calipers

Diameter
54mm
Number of pistons
1
Braking system
TRW
Position
Left
Front
axle
Construction Year from:11/2010
Construction Year from:11/2010
Diameter
54mm
Number of pistons
1
Braking system
TRW
Position
Right
Front
axle
Construction Year from:11/2010
Construction Year from:11/2010

Clutch master cylinders

Diameter
22,2mm
Threading
10 x 1 (2)
Braking system
Bosch
Material
Aluminium
Front
axle
Diameter
22,2mm
Threading
12 X 1 (2)
Braking system
Bosch
Material
Aluminium
Front
axle
Diameter
22,2mm
Threading
10 x 1 (2)
Braking system
Bosch
Material
Aluminium
Front
axle
Diameter
22,2mm
Threading
12 X 1 (2)
Braking system
Bosch
Material
Aluminium
Front
axle

Brake wheel cylinders

Diameter
19,05mm
Threading
10 x 1
Braking system
Bosch
Material
Aluminium
Rear
axle

Brake hoses

Length
330mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Rear left
axle
Length
325mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Right
Rear right
axle
Length
325mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Internal
Left
Right
Rear
axle
Length
525mm
Threading 1
F10X1
Threading 2
10
Assembly position
Left
Right
Front
axle
Length
520mm
Threading 1
M10X1
Threading 2
10
Assembly position
Left
Right
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">