OPEL KADETT D Estate (35_, 36_, 45_, 46_)

1.6 D (40 kW / 54 CV) 03/82 - 08/84

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
236mm
Thickness
12,5mm
Height
41mm
Number of holes
4
Brake disc type
Solid
Centering
60mm
Min. thickness
9,7mm
Tightening torque
110Nm
Units per box
2
Front
axle
Where to Buy

Brake pads

Width
100mm
Thickness
15mm
Height
59mm
Braking system
Delco Moraine
Wear indicator
Without
WVA number
20939
FMSI
D1436 8554, D48 734
Accessories
With anti-squeal shim
Front
axle
Where to Buy

Drums

Diameter
230mm
Width
58,5mm
Height
76mm
Number of holes
4
Centering
57mm
Max diameter
230,9mm
Rear
axle
Where to Buy

Shoes

Diameter
230mm
Width
51mm
Braking system
General Motors
Parking brake lever
With handbrake lever
Rear
axle
Construction Year to:07/1983; Transmission Type:Fully Automatic
Construction Year to:07/1983; Transmission Type:Fully Automatic
Where to Buy
Diameter
230mm
Width
50mm
Braking system
TRW
Parking brake lever
With handbrake lever
Rear
axle
Construction Year from:08/1983
Construction Year from:08/1983
Where to Buy

Shoe kit

Diameter
230mm
Width
51mm
Master cylinder diameter
19mm
Type of assembly
Not pre-assembled
Braking system
Lucas
Brake proportioning valve
Absent
Rear
axle
Where to Buy
Diameter
230mm
Width
51mm
Master cylinder diameter
19mm
Type of assembly
Pre-assembled
Braking system
Lucas
Brake proportioning valve
Absent
Rear
axle
Where to Buy

Clutch master cylinders

Diameter
20,64mm
Threading
10 x 1 (4)
Braking system
DELCO
Material
Cast Iron
Front
axle
Where to Buy
Diameter
20,64mm
Threading
15 x 1 (2),10 x 1 (2)
Braking system
DELCO
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
19,05mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
17,46mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
17,46mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
19,05mm
Threading
10 x 1
Braking system
DELCO
Material
Cast Iron
Rear
axle
Where to Buy

Brake hoses

Length
340mm
Threading 1
F10X1
Threading 2
10
Assembly position
Internal
Left
Right
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
News Car support Bike support Bicycle support
App Brembo Parts Where to buy Distributors Brembo.com
Privacy Policy Cookie policy
Logo Google Play Logo App Store
© Brembo N. V. - P.IVA 00222620163 - Share capital 8.825.662,61 Euro Bergamo companies house - Credits
TecDoc logo The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
WeChat
Privacy Policy">