TOYOTA HIACE IV Bus (__H1_, __H2_)

2.4 D (LXH12, LXH22) (58 kW / 79 CV) 08/95 - 08/01

Brake discs

Diameter
285mm
Thickness
28mm
Height
46mm
Number of holes
6
Brake disc type
Ventilated
Centering
84mm
Min. thickness
26mm
Units per box
2
Front
axle

Brake pads

Width
145mm
Thickness
16mm
Height
57mm
Braking system
Sumitomo
Wear indicator
Without
WVA number
21468
FMSI
D1344 8455
Accessories
With anti-squeal shim
Front
axle

Drums

Diameter
270mm
Width
66,5mm
Height
80mm
Number of holes
6
Centering
69mm
Max diameter
272mm
Rear
axle

Shoes

Diameter
270mm
Width
57mm
Braking system
Akebono
Accessories
With accessories
Rear
axle

Remanufactured calipers

Diameter
67mm
Number of pistons
1
Braking system
AISIN
Position
Left
Front
axle
Diameter
67mm
Number of pistons
1
Braking system
AISIN
Position
Right
Front
axle

Brake wheel cylinders

Diameter
25,4mm
Threading
10 x 1
Braking system
AISIN
Material
Cast Iron
Rear
axle
Diameter
23,81mm
Threading
10 x 1
Material
Cast Iron
Rear
axle

Brake hoses

Length
235mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Length
280mm
Threading 1
10
Threading 2
F10X1
Assembly position
Left
Front left
axle
Length
280mm
Threading 1
10
Threading 2
F10X1
Assembly position
Right
Front right
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">