PEUGEOT 405 II (4B)

1.6 (66 kW / 90 CV) 08/92 - 05/97

Save vehicle in the list

Brake discs

Diameter
266mm
Thickness
10mm
Height
27mm
Number of holes
4
Brake disc type
Solid
Centering
66mm
Min. thickness
8mm
Tightening torque
85Nm
Units per box
2
Front
axle
Where to Buy
Diameter
266mm
Thickness
20,5mm
Height
27mm
Number of holes
4
Brake disc type
Ventilated
Centering
66mm
Minimum Brembo Xtra brake disc thickness: 19,1 mm
Min. thickness
18,6mm
Tightening torque
90Nm
Units per box
2
Front
axle
Where to Buy

Brake pads

Width
95mm
Thickness
19mm
Height
49mm
Braking system
Lucas
Wear indicator
Electric
WVA number
21209, 21210
FMSI
D454 7334
Accessories
With accessories
With anti-squeal shim
With brake caliper bolts
Front
axle
Brake Disc Type:Vented
Brake Disc Type:Vented
Where to Buy
Width
105mm
Thickness
18mm
Height
54mm
Braking system
Bendix
Wear indicator
Electric
WVA number
20986, 20987, 20906, 20905
FMSI
D371 7261
Accessories
With anti-squeal shim
Front
axle
Brake Disc Type:solid
Brake Disc Type:solid
Where to Buy

Shoe kit

Diameter
229mm
Width
42mm
Master cylinder diameter
21mm
Type of assembly
Pre-assembled
Braking system
Lucas
Brake proportioning valve
Absent
Rear
axle
Construction Year to:12/1995; Braking/Driving Dynamics:for vehicles with...
Construction Year to:12/1995; Braking/Driving Dynamics:for vehicles with ABS
Where to Buy
Diameter
229mm
Width
42mm
Master cylinder diameter
21mm
Type of assembly
Pre-assembled
Braking system
Bendix
Brake proportioning valve
Absent
Rear
axle
Construction Year to:04/1997; Braking/Driving Dynamics:for vehicles without...
Construction Year to:04/1997; Braking/Driving Dynamics:for vehicles without ABS
Where to Buy
Diameter
228mm
Width
40mm
Master cylinder diameter
21mm
Type of assembly
Pre-assembled
Braking system
Lucas
Brake proportioning valve
Absent
Rear
axle
Construction Year to:04/1997; Braking/Driving Dynamics:for vehicles with...
Construction Year to:04/1997; Braking/Driving Dynamics:for vehicles with ABS
Where to Buy

Remanufactured calipers

Diameter
48mm
Number of pistons
1
Braking system
BENDIX
Position
Left
Front left
axle
Brake Disc Type:solid
Brake Disc Type:solid
Where to Buy
Diameter
48mm
Number of pistons
1
Braking system
BENDIX
Position
Right
Front right
axle
Brake Disc Type:solid
Brake Disc Type:solid
Where to Buy

Clutch master cylinders

Diameter
22,2mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1 (4)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1 (4)
Braking system
ATE
Material
Aluminium
Front
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1 (4)
Braking system
ATE
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
20,64mm
Threading
10 x 1
Braking system
TRW
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
20,64mm
Threading
12 x 1
Braking system
Bendix
Material
Cast Iron
Assembly position
Left
Rear left
axle
Where to Buy
Diameter
20,64mm
Threading
12 x 1
Braking system
Bendix
Material
Cast Iron
Assembly position
Right
Rear right
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1
Braking system
Bosch
Material
Cast Iron
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
News Car support Bike support Bicycle support
App Brembo Parts Where to buy Distributors Brembo.com
Privacy Policy Cookie policy
Logo Google Play Logo App Store
© Brembo N. V. - P.IVA 00222620163 - Share capital 8.825.662,61 Euro Bergamo companies house - Credits
TecDoc logo The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
WeChat
Privacy Policy">