JAGUAR XJ (X351)

5.0 SCV8 (375 kW / 510 CV) 10/09 - 12/19

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
355mm
Thickness
32mm
Height
48mm
Number of holes
5
Brake disc type
Ventilated
Centering
71mm
Min. thickness
30mm
Units per box
1
Front
axle
Where to Buy
Diameter
380mm
Thickness
36mm
Height
48mm
Number of holes
5
Brake disc type
Ventilated
Centering
71mm
Min. thickness
34mm
Units per box
1
Front
axle
Where to Buy
Diameter
326mm
Thickness
20mm
Height
38mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Min. thickness
18mm
Tightening torque
103Nm
Units per box
1
Rear
axle
Where to Buy
Diameter
376mm
Thickness
26mm
Height
42mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Min. thickness
24mm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
193mm
Thickness
18mm
Height
79mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
24474, 24475
FMSI
D1448 8616
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Where to Buy
Width
114mm
Thickness
17mm
Height
63mm
Braking system
TRW
Wear indicator
Prepared for wear indicator
WVA number
25742
FMSI
D1753 8981
Accessories
With anti-squeal shim
Rear
axle
Vehicle Identification Number (VIN) from:V90866
Vehicle Identification Number (VIN) from:V90866
Where to Buy
Width
122mm
Thickness
16mm
Height
64mm
Braking system
Teves
Wear indicator
Without
WVA number
25115, 25114
FMSI
D1449 8617
Accessories
With anti-squeal shim
Rear
axle
Vehicle Identification Number (VIN) to:V90865
Vehicle Identification Number (VIN) to:V90865
Where to Buy

Brake pad accessories

Length
551mm
Type
Wear indicator
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Brembo Greenance<br/>brake fluid

Brembo Greenance
brake fluid

Greenance is the brake fluid of the Beyond range, focused on sustainability but without sacrificing performance.
It is the perfect combination of high performance and sustainability. With its high boiling point and viscosity standards, in addition to a formulation containing 84% of bio-based material* and free of borate esters, this fluid is classified as non-hazardous according to GHS/CLP regulations.
Greenance brake fluid stands out for its low viscosity, which is an essential feature for the proper functioning of ABS and ESP systems that require a rapid and constant fluid flow. The parameter exceeds the standards set for DOT 4 fluids, ensuring prompt response and optimal vehicle control in all conditions. Greenance brake fluid complies with FMVSS 116, ISO 4925, and SAE J1703 standards, ensuring high performance and reliable use in a wide range of applications.
More information
Check owner's manual of your car for braking system compatibility with the chosen fluid.
Click on here to download the Brembo brake fluid Safety Data Sheet.
* 84 kg of ISCC PLUS certified material per 100 kg of product. Sustainability Declaration in accordance with ISCC PLUS requirements.
News Car support Bike support Bicycle support
App Brembo Parts Distributors Brembo.com
Privacy Policy Cookie policy
Logo Google Play Logo App Store
© Brembo N. V. - P.IVA 00222620163 - Share capital 8.825.662,61 Euro Bergamo companies house - Credits
TecDoc logo The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
WeChat
Privacy Policy">