FORD KA Van (RB)

1.3 i (44 kW / 60 CV) 05/02 - 05/05

This application is not available for your country. Contact us for more information

Brake discs

Diameter
240mm
Thickness
12mm
Height
43mm
Number of holes
4
Brake disc type
Solid
Centering
64mm
Min. thickness
10mm
Tightening torque
85Nm
Units per box
2
Front
axle
Diameter
240mm
Thickness
20mm
Height
43mm
Number of holes
4
Brake disc type
Ventilated
Centering
64mm
Min. thickness
18mm
Units per box
2
Front
axle

Brake pads

Width
150 - 151 mm
Thickness
19mm
Height
51 - 54 mm
Braking system
Teves
Wear indicator
Without
WVA number
23200, 23201
FMSI
D1460 8660
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle

Drums

Diameter
180mm
Width
44mm
Height
76mm
Number of holes
4
Centering
50,3mm
Max diameter
181mm
Rear
axle
Braking/Driving Dynamics:for vehicles without ABS; Braking/Driving...
Braking/Driving Dynamics:for vehicles without ABS; Braking/Driving Dynamics:for vehicles without ABS
Diameter
180mm
Width
44mm
Height
76mm
Number of holes
4
Centering
50,3mm
Max diameter
181mm
Bearing kit
Rear
axle
Braking/Driving Dynamics:for vehicles without ABS
Braking/Driving Dynamics:for vehicles without ABS
Diameter
180mm
Width
44mm
Height
76mm
Number of holes
4
Centering
50,3mm
Max diameter
181mm
Rear
axle
Diameter [mm]:180; Diameter [mm]:180
Diameter [mm]:180; Diameter [mm]:180
Diameter
180mm
Width
44mm
Height
76mm
Number of holes
4
Centering
50,3mm
Max diameter
181mm
Bearing kit
Rear
axle
Diameter [mm]:180
Diameter [mm]:180

Shoes

Diameter
180mm
Width
32mm
Braking system
TRW
Parking brake lever
With handbrake lever
Rear
axle
Diameter
180mm
Width
32mm
Braking system
AP Lockheed
Parking brake lever
With handbrake lever
Rear
axle

Remanufactured calipers

Diameter
48mm
Number of pistons
1
Braking system
ATE
Position
Left
Front
axle
Diameter
48mm
Number of pistons
1
Braking system
ATE
Position
Right
Front
axle
Diameter
48mm
Number of pistons
1
Braking system
ATE
Position
Left
Front
axle
Diameter
48mm
Number of pistons
1
Braking system
ATE
Position
Right
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">