PEUGEOT 404

1.6 (48 kW / 65 CV) 04/63 - 12/71

Save vehicle in the list

Drums

Diameter
280mm
Width
67mm
Height
81mm
Number of holes
5
Centering
93mm
Max diameter
281mm
Rear
axle
Where to Buy

Shoes

Diameter
280mm
Width
62mm
Braking system
Bendix
Rear
axle
Where to Buy

Shoe kit

Diameter
280mm
Width
62mm
Master cylinder diameter
29mm
Type of assembly
Not pre-assembled
Braking system
Bendix
Brake proportioning valve
Absent
Rear
axle
Where to Buy

Clutch master cylinders

Diameter
22mm
Threading
1/2 20 UNF (1)
Material
Cast Iron
Front
axle
Where to Buy
Diameter
25,4mm
Threading
1/2 20 UNF (1)
Material
Cast Iron
Front
axle
Where to Buy
Diameter
25,4mm
Threading
3/8 24 UNF (2)
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
28,57mm
Threading
3/8 24 UNF
Braking system
Bendix
Material
Cast Iron
Assembly position
Right
Rear right
axle
Where to Buy
Diameter
28,57mm
Threading
3/8 24 UNF
Braking system
Bendix
Material
Cast Iron
Assembly position
Left
Rear left
axle
Where to Buy
Diameter
20,64mm
Threading
10 x 1
Braking system
Bendix
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
19mm
Threading
3/8 24 UNF
Braking system
Bendix
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
30mm
Threading
3/8 24 UNF
Braking system
Bendix
Material
Cast Iron
Front
axle
Where to Buy

Brake hoses

Length
481mm
Threading 1
5/8-3/8
Threading 2
5/8-3/8
Assembly position
Left
Right
Rear
axle
Where to Buy

Brake master cylinders

Diameter
19,05mm
Threading
12 x 1
Material
Cast Iron
Front
axle
Where to Buy

Clutch cylinders

Diameter
28,57mm
Threading
10 x 1
Material
Cast Iron
Front
axle
Where to Buy
Diameter
28,57mm
Threading
12 x 1
Material
Cast Iron
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">