SUZUKI IGNIS I (FH)

1.5 Sport (RG415) (80 kW / 109 CV) 12/03 - 12/05

Brake discs

Diameter
257mm
Thickness
17mm
Height
49mm
Number of holes
4
Brake disc type
Ventilated
Centering
60mm
Min. thickness
15mm
Tightening torque
85Nm
Units per box
2
Front
axle

Brake pads

Width
109mm
Thickness
15mm
Height
45mm
Braking system
Sumitomo
Wear indicator
Acoustic
WVA number
23507, 23508, 23509
FMSI
D2005 9235, D2005 9304
Accessories
With anti-squeal shim
Front
axle
Width
106mm
Thickness
14mm
Height
43mm
Braking system
NBK
Wear indicator
Acoustic
WVA number
24040, 24041, 24039
FMSI
D900 7777
Accessories
With anti-squeal shim
Rear
axle
Suspension:for vehicles with sports suspension
Suspension:for vehicles with sports suspension

UPGRADE brake pads

Width
106mm
Thickness
14mm
WVA number
24039, 24040
Rear
axle
Suspension:for vehicles with sports suspension
Suspension:for vehicles with sports suspension

Shoes

Diameter
200mm
Width
29mm
Braking system
Opel
Parking brake lever
With handbrake lever
Rear
axle
Diameter
180mm
Width
26mm
Braking system
Sumitomo
Rear
axle

Shoe kit

Diameter
200mm
Width
29mm
Master cylinder diameter
16mm
Type of assembly
Pre-assembled
Braking system
Lucas
Brake proportioning valve
Absent
Rear
axle

Remanufactured calipers

Diameter
51mm
Number of pistons
1
Braking system
TOKICO
Position
Left
Front
axle
Diameter
51mm
Number of pistons
1
Braking system
TOKICO
Position
Right
Front
axle
Diameter
34mm
Number of pistons
1
Braking system
TOKICO
Position
Left
Rear
axle
Diameter
34mm
Number of pistons
1
Braking system
TOKICO
Position
Right
Rear
axle

Clutch master cylinders

Diameter
20,64mm
Threading
10 x 1 (2)
Braking system
BOSCH
Material
Aluminium
Front
axle

Brake wheel cylinders

Diameter
15,87mm
Threading
10 x 1
Material
Aluminium
Rear
axle
Diameter
15,87mm
Threading
10 x 1
Braking system
NABCO
Material
Aluminium
Rear
axle

Brake hoses

Length
443mm
Threading 1
F10X1
Threading 2
10
Assembly position
Left
Right
Front
axle
Length
440mm
Threading 1
F10X1
Threading 2
10
Assembly position
Left
Right
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">